Interruptor regulador
PowerBox DigiSwitch V2 JR

54,00

Interruptor DigiSwitch V2 con opción de seleccionar voltaje de salida. Conexión a batería Futaba/JR ¡ver descripción para las características completas!

En stock y disponible para envío inmediato!

Descripción

Comentarios por Martin Pickering:


 

El DigiSwitch es un interruptor electrónico con regulador integrado.

Gracias a su diseño, el interruptor no puede ser accionado ni alterado por error ni por vibraciones al tener que realizar una pequeña secuencie con el botón para alterar su estado de encendido o apagado.

Incorpora un led que indica el estado de la batería

Se puede configurar el voltaje a la que quiere que se regule, ya sea 6,0v 7,0v o 7,6v. O puede elegir que no regule (mismo voltaje que entra sale)

NUEVO V2: En esta última versión del DigiSwitch, el V2, se ha reducido su tamaño pero incrementado su potencia. Además de disponer de telemetría compatible con emisoras CORE.

Este concretamente es la versión con conector Futaba/JR para la batería (también disponible con conector MPX)

Martin Pickering

Descripción oficial del producto:


 

  • Interruptor electrónico de seguridad
  • Salida seleccionable entre regulado (a 6,0v –  7,0v – 7,6v) o sin regular
  • Led de estado de la batería
  • Telemetría para emisoras CORE
  • Baterías compatibles: Lipo 2s, LiIon 2s, LiFePo 2s, NiMh/NiCd 5s
  • Voltaje: 4,0v-9,0v
  • Consumo: Max 10A
  • Baterías compatibles: Lipo 2s, LiIon 2s, LiFePo 2s, NiMh/NiCd 5s
  • Dimensiones: 50 x 18 x 11mm
  • Peso: 15g

 

Descripción:


PowerBox Systems have been producing the DigiSwitch since 2004, and it still remains the smallest and lightest voltage regulator available commercially.

The DigiSwitch is an excellent choice for any application where there is no space for mechanical switches and heavy batteries. In conjunction with modern LiPo or LiFePo battery technology, the DigiSwitch represents an effective weight-saving measure, and also provides additional security with its integral voltage monitor and electronic switch, which is both totally reliable and vibration-resistant.

The on / off switching process is initiated by pressing the push-button twice. The micro-controller monitors the sequence, and turns the electronic switch on or off if the procedure is valid. This eliminates any danger of operating the switch accidentally, and produces a connection which is resistant to vibration.

The switch is a latching type, i.e. it stores the last switched state. This means that the system always remains switched on even if there is a brief interruption in the circuit at the battery end.

A further safety feature of the DigiSwitch is the integral voltage monitor: the tri-colour LED indicates the battery’s state of charge in three stages. The voltage monitor can be set to suit all commonly used battery types: 2S LiPo, 2S LiFePo, 5S NiMH or 4S NiMH.

The DigiSwitch reduces the input voltage to 5.9 V (optionally 5.3 V), and therefore supplies the correct voltage for standard 6 V servos.

Two different connector systems are available at the battery end: Uni or MPX types. The MPX version is supplied as standard with two receiver connecting leads.

También te recomendamos…