Profesional
Centralita Powerbox

269,00

Centralita Profesional de Powerbox-Systems. Es una centralita ideal para muchos modelos, con entrada de señal clásico, usando receptores normales con un cable por cada canal. Tiene cuatro salidas dobles programables, todo regulado, doble bateria…  ¡ver descripción para las características completas!

Disponible para reserva

Extras opcionales:

Subtotal:

Add-ons total:

Total:

SKU: PBS 4330 Categorías: , Etiquetas: , ,

Descripción

Comentarios por Martin Pickering:


 

Esta es una versión de la centralita que hasta hace unos años venía montando en prácticamente todos mis modelos, y es ideal para modelos acrobáticos tamaño 100cc y usando receptores normales (No Sbus)

Tiene cuatro salidas dobles programables (Servo Matching para reverse, centro y finales de recorrido) además delas ventajas de siempre de doble alimentación y el resto de garantías que nos da una centralita de Powerbox-Systems.

En conclusión, una gran centralita para una amplia gama de modelos. Dicho esto, si aún no tiene los receptores que va a usar, recomendaría mirar una centralita tipo SRS. Si te da miedo o no conoce las ventajas ponte en contacto y estudiamos tu caso.

Martin Pickering

Descripción oficial del producto:


 

Destacado

  • Función de Servo Match: programe centro, final de recorrido y reverse para 4 canales y 8 servos
  • Pantalla OLED integrada de 128*64 px
  • Menu de usuario extremadamente sencillo, programado con el interruptor SensorSwitch
  • 8 salidas, cuatro de ellos dobles
  • Amplificación de señal y eliminación de interferencias en las 15 salidas
  • Caja negra, graba las pérdidas de señal de frames, holds y failsafes
  • Frame rate variable, de 9ms a 21ms
  • Procesador de 16 bit para un procesado rápido y de alta resolución de la señal
  • Salida regulada por duplicado para servos y receptores
  • Voltaje regulable de 5.9v o 7.4v
  • Transmisión directa de información de batería y receptor a la emisora
  • Display de voltaje independiente por cada batería
  • Indicadores de voltaje mínimo para alertar al usuario de caídas de tensión
  • Grandes disipadores de calor para un alto rendimiento de los reguladores
  • Reguladores monitorizados, con indicador de error de regulador
  • Alimentación permitida por tres tipos de batería: LiPo/LiIon, NiMh/NiCd, LiFePo
  • Filtrado y eliminación de corrientes generados desde los servos
  • Actualizable desde Interfaz USB o adaptador BlueCom

Ficha Técnica

  • Voltaje admitido: 4v a 9v
  • Alimentación: 2S LiPo/LiIon, 2S LiFePo, 5S NiCd/NiMH
  • Consumo encendido: 130mA
  • Consumo en Standby: 15uA
  • Máximo corriente: Picos 2x20A
  • Voltaje perdido: 0,3v
  • Voltaje salida: 5,9v o 7,4v (regulado)
  • Entrada de señal: serie
  • Canales: 8
  • Salidas: 12
  • Salidas programables: 4 canales, 8 salidas
  • Resolución de señal de servo: 0,5us
  • Framerates disponibles: 9ms, 12ms, 15ms, 18ms, 21ms
  • Pantalla: OLED 128 – 64 px integrado
  • Secuenciador integrado: No
  • Telemetría soportado: Jeti, Futaba, Spektrum, Hott, M-Link, JR
  • Dimensiones: 110x 72 x 24 mm
  • Peso: 115g
  • Peso Sensor Switch: 15g
  • Rango de temperaturas: -30ºC a +75ºC

 

Contenido:

  • PowerBox Profesional
  • SensorSwitch
  • 2 cables patch
  • Instrucciones

 

Descripción:

The PowerBox Professional has been a popular and reliable power supply system ever since its introduction in 2002. However, until now it has been limited to use with 4S or 5S NiCd or NiMH batteries.
Now we are introducing the 3rd generation of the PowerBox Professional, which has been completely revised to cater for the developing demands on modern power supply systems.
The new version incorporates many new features, including a high-resolution OLED screen, electronic switches, menu-based programming, regulated output voltage of 5.9 V or 7.4 V, four match-channels, telemetry capability and much more.
The Professional supports eight channels remotely accessed from the receiver, four of which are equipped with a servo-match function. This makes it ideal for aerobatic models in the 25% to 35% class as well as for jets. The purpose of servo-matching is to adjust the centre point, end-points and direction of rotation very accurately for each servo. This means that multiple servos connected mechanically to a single control surface can be fine-tuned to operate exactly in parallel, preventing the servos working against each other. They are able to develop their full power, and consume less current. Servo-matching can also extend the effective life of your servos enormously.

However, servo-matching also allows functions to be linked, avoiding the need for two channels at the transmitter. As an example: the left and right landing flaps can be operated using just one transmitter channel, as the direction of rotation and the servo end-points are adjusted at the Professional. This saves channels, and in many cases makes the transmitter programming procedure much easier.
All the settings are programmed using the SensorSwitch in conjunction with the high-resolution OLED screen. All the menu points are displayed in full text form on the screen – rather than as abbreviations – which makes it much easier to understand the procedure.
Naturally it is possible to use the MagSensor to switch the Professional on and off, if you wish to conceal the switch.
The PowerBox Professional can be updated using the USB interface adapter. This means that future expansions – such as additional telemetry systems – can be loaded and used in just a few minutes.

However, servo-matching also allows functions to be linked, avoiding the need for two channels at the transmitter. As an example: the left and right landing flaps can be operated using just one transmitter channel, as the direction of rotation and the servo end-points are adjusted at the Competition. This saves channels, and in many cases makes the transmitter programming procedure much easier.

All the settings are programmed using the SensorSwitch in conjunction with the high-resolution OLED screen. All the menu points are displayed in full text form on the screen – rather than as abbreviations – which makes it much easier to understand the procedure.

The Competition offers the option of a telemetry link with various radio control systems. This facility enables the pilot to view the voltage and residual capacity of both batteries on the transmitter’s integral screen. The telemetry interface is simply connected to the receiver using a patch-lead; the TM1000 telemetry module is only required with Spektrum equipment. The receiver then sends the data directly to the transmitter screen. Alarms – such as battery failure – are also generated at the transmitter itself.

The high-resolution OLED screen displays the voltage and residual capacity of both batteries, as well as the output voltage actually present.

The Competition delivers a regulated output voltage of 5.9 V or 7.4 V, making it a great choice for standard 6.0 V servos as well as HV systems. In both cases the constant output voltage ensures consistent running and extended effective life for your servos.

The PowerBox Competition can be updated using the USB interface adapter. This means that future expansions – such as additional telemetry systems – can be loaded and used in just a few minutes.


Información adicional

Incluye

Centralita Mercury, Centralita Mercury + Sensor de velocidad