Bomba de humo, 2 salidas
Powerbox-Systems

186,00

Bomba de humo de Powerbox-Systems, la forma sencilla y fiable de usar humo. Con salida doble para mayor caudal o dos salidas independientes ¡ver descripción para las características completas!

En stock y disponible para envío inmediato!

SKU: PBS 8015 Categorías: ,

Descripción

Comentarios por Martin Pickering:


 

Durante años, la única solución que he usado para sistemas de humo ha sido la bomba de humo de Powerbox-Systems. Tanto para acrobaticos como para jets, resulta ser una opción ideal. Con unas dimensiones bastante reducidas y un funcionamiento muy similar al de un motor+variador convencional, la instalación y programación es cuestión de escasos minutos.

Si quieres humo, opta por la bomba de humo de Powerbox-Systems.

Martin Pickering

Descripción oficial del producto:


 

  • Bomba con engranajes metálicos
  • Velocidad regulable de 0-100%
  • No requiere valvula externa
  • Alto caudal
  • Se puede alimentar directamente desde receptor
  • Apagado automático si está conectado a batería independiente
  • Diseño compacto
  • Reducido consumo
  • Facil instalación
  • Voltaje admitido: 4v a 9v
  • Consumo encendido: Aprox 1,8A al 100%
  • Consumo en Standby: 10uA
  • Caudal máximo: 950ml/min
  • Liquidos de humo: SmokeOil “Blue Max” o similares
  • Dimensiones: 79 x 31 mm
  • Peso: 128g 
  • Rango de temperaturas: -30ºC a +75ºC

 

Descripción:


The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit’s high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world’s most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a “stand-by” mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.