Interruptor
PowerBox Smart Switch

39,0048,00

Interruptor electrónico con una entrada y una salida (o dos salidas si se pide con conector MPX para la batería). No incorpora regulador. ¡ver descripción para las características completas!

Limpiar

Subtotal:

Add-ons total:

Total:

Descripción

Comentarios por Martin Pickering:


 

El Smart Switch es un simple interruptor, un sustituto del tradicional interruptor mecánico para cuando una seguridad adicional es necesaria.

Gracias a su diseño, el interruptor no puede ser accionado ni alterado por error ni por vibraciones al tener que realizar una pequeña secuencie con el botón para alterar su estado de encendido o apagado.

Incorpora un led que indica el estado de la batería (verde, naranja y rojo)

Disponible en dos versiones:

1- Con conector de batería tipo Futaba. Tiene una entrada y una salida

2- Con conector de batería tipo MPX. Tiene una entrada y dos salidas.

En ninguno de los dos casos se regula el voltaje (lo que entra es lo que sale)

Martin Pickering

Descripción oficial del producto:


 

  • Interruptor electrónico
  • Led de estado de la batería
  • Baterías compatibles: Lipo 2s, LiFePo 2s, NiMh/NiCd 4s y 5s

 

Descripción:


The SmartSwitch is ideal for all applications where security has top priority, but voltage regulation is not required. The micro-controller by which the On / Off switching system is controlled makes the SmartSwitch the perfect substitute for a mechanical switch.

The on / off switching process is initiated by pressing the push-button twice. The micro-controller monitors the sequence, and turns the electronic switch on or off if the procedure is valid. This eliminates any danger of operating the switch accidentally, and produces a connection which is resistant to vibration. The switch is a latching type, i.e. it stores the last switched state. This means that the system always remains switched on even if there is a brief interruption in the circuit at the battery end.

A further safety feature of the SmartSwitch is the integral voltage monitor: the tri-colour LED indicates the battery’s state of charge in four stages. The voltage monitor can be set to suit all commonly used battery types: 2S LiPo, 2S LiFePo, 5S NiMH or 4S NiMH.

The SmartSwitch requires no cooling in operation. The switching capacity is more than 20 A, and in practice the limiting factor is the connecting cable.

As already mentioned, the SmartSwitch is not fitted with a voltage regulator, and for this reason it does not constitute a means of operating standard 6 V servos with LiPo batteries. Naturally HV systems can be operated with LiPo batteries without problem, and suitable servos can be operated directly with LiFePo batteries.

Two different connector systems are available at the battery end: Uni or MPX types. The MPX version is supplied as standard with two receiver connecting leads.

Información adicional

Conector

Entrada de batería tipo Futaba (JR) – Una salida, Entrada de batería tipo MPX – Dos salidas

También te recomendamos…