P2-ServoBridge
Telemetria: Servo

39,90

Powerbox P2-ServoBridge, obtén datos de telemetria en tiempo real sobre el consumo, voltaje y temperatura de tus servos! Programa avisos y cortes, y conéctalo como si fuera una alargadora más.  ¡ver descripción para las características completas!

(servo no incluido)

Temporalmente sin stock, puede traerse en unos días bajo encargo

Subtotal:

Total de complementos:

Total:

SKU: PBS 9250 Categoría: Etiquetas: , , , , ,

Descripción

Comentarios por Martin Pickering:


 

El P2-ServoBridge de Powerbox-Systems es un pequeño adaptador que no solo permite conectar un servo mediante sistema bus, sino que además manda de vuelta datos de telemetría sobre el servo. Esto incluye voltaje, consumo y temperatura.

Esto permite programar alertas en la radio en base a los datos de la telemetria en tiempo real, advirtiendo de problemas antes de que sean críticos.

Además, permite programar “cortes” de forma que se puede controlar a partir de que consumo cortarle suministro de corriente a ese servo, eliminando el riesgo de daños a causa de un cortocircuito prolongado.

Puede funcionar con los sistemas bus de varias marcas de receptor, además de ser compatible con la centralita Powerbox Royal SR2.

Funciona con cualquier servo, no tienen que ser servos Sbus. Se adhiere al servo por bajo para obtener una correcta lectura de telemetría, y se conecta como si fuera una alargadora más.

Martin Pickering

Descripción oficial del producto:

 

Ficha Técnica:

  • Voltaje: 4,0 – 10,0v
  • Consumo encendido: 10mA
  • Consumo máximo: 20A
  • Señal de entrada: P2-Bus. Sbus2, ExBus, Srxl, Pwm
  • Compatibilidad: Por bus: Powerbox, Jeti, Futaba. Por Pwm: todos
  • Canales: 26
  • Salidas de servo: 1
  • Resolución de servo: 0,5us
  • Frame rate: 12ms, 14ms, 16ms, 18ms 
  • Telemetria compatible: P2-Bus, Sbus2, ExBus
  • Dimensiones: 35 x 12 x 5 mm
  • Peso: 4g
  • Rango de temperaturas: -30ºC a +85ºC

 

Descripción:


The P²-ServoBridge is the key component in an entirely new servo bus technology which presents unprecedented possibilities. If a servo bus is employed, only one cable is required for several servos. The servos are individually addressed, and therefore each servo knows which signal is intended for it. Earlier servo bus systems simplified the wiring in the model; for example, saving multiple plug / socket connections in the wings. The new feature of the PowerBox P²-Bus is that it works bi-directionally! This means: not only can accurate digital signals be fed to the servos, but important telemetry data – such as current, voltage, temperature and other information – can also be fed back to the Core or Atom transmitter. Targeted alarm settings at the transmitter alert the user to defects in good time, so they can be corrected without the need to analyse reams of data. But even that’s not all: the parameters of the P²-ServoBridge can be altered directly from the transmitter. The integral electronic fuse can be adjusted to suit the particular servo, precisely to the milli-second and milli-amp. A micro-controller decodes the bus signal, monitors the current accurately and at high speed at the servo itself, and switches the servo off reliably if the set thresholds are exceeded.
This technology eliminates all the disadvantages inherent in simple resettable fuses (polyfuses) – such as temperature dependence or ageing effects. A range of pre-set profiles enables any modeller to find the correct setting for a particular servo even without a knowledge of electronics.
The adhesive pad supplied is used to attach the P²-Servobridge to the bottom or side of the servo case, where it also monitors the servo temperature. In addition to the P²-BUS, the P²-Servobridge works with other bus systems such as S.BUS or SRXL, and even with conventional PWM servo signals. This means that the device can also be used for accurate over-voltage power-off – for example, with retract servos – even when bus wiring is not used. The input signal is detected automatically, and the fuse is pre-set to suit standard servos with an output torque of up to 30kg/cm, so in most applications the P²-Servobridge can be used as a Plug ´n Play device.

 

Información adicional

Conector

Conector negro, Conector rojo (centralitas más antiguas)